© Damian Poffet | Giuliani Hönger Architekten
© Damian Poffet | Giuliani Hönger Architekten

What characterizes the LONGOTON® tiles?

LONGOTON® brick tiles are available in lengths of up to 3,000 mm. They can be used for both horizontal and vertical facades. The LONGOTON® tile facade is a product with general technical approval in Germany (Z. 10.3.805). As part of the ongoing quality check for compliance with the approval, the products are additionally inspected by independent institutes. The system corresponds to DIN 18 516 Part 1 for rear-ventilated facades with rainscreen cladding.

In which colors are LONGOTON® tiles available?

The LONGOTON® brick tiles are available as standard in 16 natural colors. These colors refer to intrinsic colors of the fired, unglazed ceramic tile, so that no visually-distracting shards can be made visible as a result of any cut ends on the surface. On an order basis, other natural special colors are also developed individually on request. Additionally, it is possible to achieve any desired color using a large number of glazes.

What dimensions can LONGOTON® tiles have?

Due to the free choice between a horizontal or vertical facade, a wide range of designs are possible, depending on whether a building is to be emphasized in width or in height. LONGOTON® brick tiles are available in tile heights of 150 to 1,000 mm and in a length of up to 3,000 mm. In addition to the usual formats, special heights are possible.

What systems are there for LONGOTON® tiles?

The suitable system is used according to the alignment of the LONGOTON® tiles – L²R vertical for the vertical attachment of the brick tiles and the rapid system Gen. 06 for horizontal installation.

+ To the Facade technology section

© Anke Müllerklein | Arup, Kopenhagen
© Anke Müllerklein | Arup, Kopenhagen

Technical data on LONGOTON® tiles

The gross shard density amounts to > 2.0 g/cm³ (DIN 105 Part 4 Ceramic bricks). Additionally, the brick tiles are frost-resistant pursuant to DIN EN 539 (Part 2 is fulfilled). Appearance and structure according to the requirements pursuant to DIN EN 1304, Annex B are fulfilled. There is a general type approval Z-10.3-805: rear-ventilated facade with rainscreen cladding with LONGOTON® brick tiles. The LONGOTON® tile facade corresponds to DIN 18 516, Part 1.

Product overview

ALPHATON®

Product type

Brick tiles

Lengths

Up to 1,500 mm

Heights

150 to 400 mm

System types

Gen. 06-Rapid;
L2-Rapid Landscape
L2-Rapid Portrait

DIN standards

DIN 18516, Part 1
for rear-ventilated facades with rainscreen cladding

Approvals

GENERAL TYPE APPROVAL
Z10.3-732

LONGOTON®

Product type

Brick panels in long format

Lengths

Up to 3,000 mm

Heights

150- to 1,000 mm

System types

Gen. 06 and soon
L² Rapid for horizontal format

DIN standards

DIN 18516, Part 1
for rear-ventilated facades with rainscreen cladding

Approvals

GENERAL TYPE APPROVAL:
Z-10.3- 805

BAGUETTES

Product type

Hollow ceramic elements e.g. oval, triangular, four-edge

Lengths

Up to 3,000 mm

Heights

150 to 400 mm

System types

With rearward attachment
screw straps or rapid system

SERATON®

Product type

Brick grid

Lengths

Up to 800 mm, special formats on request

Heights

Up to 480 mm, special formats on request

System types

Stainless steel rope construction

SPECIAL

Product type

Brick tiles in every desired format

Lengths

Individually selectable

Heights

Individually selectable

System types

Format dependent

Contact us

Our experts are always available to advise you. Please feel free to contact us at any time with questions about our products, systems, or projects. Our team of experts—both in the office and in the field—will be happy to advise you on all matters related to brick facades and MOEDING systems.

+ Contact